Solar Panel Sheet Extrusion Line
1. Interlocking safety design ensures the safety of operators
2. Equipped with three screws and optimized combination of length diameter ratio
3. The equipment speed is controlled by frequency conversion and touchscreen
Description
The machine applies international advanced technology, uses PP, PE, and related polyolefin materials as raw materials to produce and process the sheet for photovoltaic, and is the preferred equipment in the new energy industry
Solar Panel Sheet Features:
1. PET substrate has been used as a solar panel material for more than 30 years. However, PET material is easy to crack and delaminate under hot and humid conditions, with reduced adhesion, poor weather resistance, and water vapor barrier resistance. Although fluorine film can provide weather resistance, abrasion resistance, flame retardancy, water resistance, etc. for the solar panel, it is difficult to degrade and easy to pollute the environment.
However, polyolefin materials can make up for these shortcomings after modification and processing, and polyolefin has better water vapor resistance than PET. Therefore, it is a major development and application direction of solar panels to replace fluorine film and/or PET substrate with polyolefin materials in whole or in part to obtain more green and environment-friendly solar panels and improve the weather resistance, and water vapor resistance of the panel.
2. The PET sheet is mainly used for solar panels and also can be used in other places where weather resistance is required. At present, the application scenarios are very wide
3. Equipped with a three-in-one water tank to save energy and reduce consumption
4. The cutting table adopts a servo motor and swing bar structure to ensure accuracy and speed
Specifications
Model | 5EPX110/120/80-1600 |
L/D ratio | 33:1 |
Sheet width | 1350mm |
Sheet thickness | 0.3-0.4mm |
Max extruding capacity | 300 kg/h |
Required power | 200 kw |
Dimension L*W*H | 20000x4500x4500 mm |
Machine weight | 20 T |