Split type automatic suction machine

▲ 700G suction machine adopts a high-speed rectifier carbon brush motor, with small volume and strong suction.
▲ The main machine and hopper are designed separately, which is safe and simple; The hopper can be directly placed on the dryer or other raw material containers.
▲ Microcomputer operation control program, overload, and shortage alarm.

Add to Inquiry

Description

The function of the automatic suction machine:
▲ The suction machine is an automatic material conveying equipment, which uses the wind pressure generated by the super strong wind blower to transport raw materials;
▲ Strong wind, high efficiency, small land occupation, space-saving, low cost, beautiful and practical;
▲ It is equipped with auxiliary equipment with convenient installation, simple operation, strong long-distance conveying capacity, stable production, reliable operation, and fully automatic production
▲ The suction machine is widely used in the injection molding industry, granulation industry, food, chemical industry, etc; It can be used with a dryer, dehumidifier, host hopper, and other related equipment, which is convenient for environmental protection.

Principle of automatic suction machine:
▲ The hopper of the suction machine is generally placed on the equipment to be pumped and stored (such as a dryer);
▲ The suction machine is operated by; Hopper, inductive switch, mechanical air switch, filter screen, feed inlet, suction inlet, suction pipe, feed pipe, and host;
▲ Host: mainly time relay controls the work and rest of the equipment, and its components: motor, filter; Air inlet, air suction device, inductive connecting wire, and multiple groups of relays.
▲ When there is no material in the small hopper of the suction machine, the mechanical air switch will fall down and open the induction switch. When the induction switch is opened, the relay of the host machine will open to enable the motor to start running, and the motor will run to drive the exhaust device, and start to go to the small hopper through the air filter. Under the action of the air suction, the mechanical air switch will close the outlet upward to form a small hopper vacuum. There is a material pipe at the inlet to the hopper, The raw material starts to enter the small hopper and is isolated by the filter screen and will not be sucked into the direction of the motor. When the set operation time of the motor reaches, it will stop. When there is no vacuum in the small hopper, the mechanical air switch will fall, the raw materials will fall into the dryer, and the circulation will end;
In this way, the stored equipment can always be kept full of materials, which is convenient for use and drying.

Specifications

Mode 5E-300G 5E-400G 5E-700G 5E-800G 5E-800G2 5E-900G
 

Power

type carbon brush induction carbon brush induction
specification 1KW/220V 0.75KW/380V 1KW/220W 1.1KW/380V 2.2KW/380V 4.0KW/380V
Capacity (kg/t) 290 350 300 300-400 350-450 300-350
Suction lift (m) 4 4 4 5 5
Static pressure (mm / H20) 1300 1400 1550 1800 2400 2600
Capacity (L) 7.5 7.5 7.5 7.5 7.5 7.5
Tube diameter (mm) Φ38×3.5m/1pcs Φ38x4m/1 pcs Φ38x4m/2pcs Φ38x4m /2pcs Φ38x5m/2pcs Φ38x4m /4pcs
Outline

dimension (cm)

 

whole-body / / 37*37*55 46*38*70 50X40X72 60*50*82
storage barrel 40*30*44 40*30*44 40*30*44 40*30*44 40*30*44 40*30*44

(2个)

net weight (kg)

 

whole body 11 32 18 46 58 85
storage barrel

 

/ / 6 6 6 8