Showing 13–24 of 25 results
-

The most effective and economical equipment for plastic drying is widely applicable to the drying of any plastic material. It can dry the raw materials that are wet due to packaging, transportation, or recycling. The stainless steel barrel can be directly equipped with injection molding machines, extruders, granulators, etc. for drying plastics. It is fast and space-saving. This top-blowing hot air dryer can provide 25-1000kg of material.
-

Principle of horizontal heating mixer: the heat transfer oil in the oil tank is heated by an electric heating tube, and the materials in the barrel are stir-fried and dried by using this temperature during the mixing process. The interlayer of the barrel is heated quickly and evenly, which is better than direct heating, so as to achieve the purpose of mixing and drying.
-

In the process of raw material treatment, the dehumidification dryer uses the honeycomb runner with a strong dehumidification performance. After the water in the blank is collected. The air with a low dew point and strong moisture absorption capacity is formed for dehumidification and drying of raw materials.
-

▲ Oil temperature machine is applicable to injection molding, precision injection molding mold temperature control, extrusion molding temperature control, runner heating temperature control, and rubber, and plastic machinery temperature control.
▲ With complete specifications, water, and hot oil can be selected as the heat transfer medium, and suitable models can be selected according to the required temperature.
-

The application of the screw chiller to the cooling of the plastic processing machinery molding mold can greatly improve the surface clarity of the plastic products, reduce the surface wrinkles and internal stress of the plastic products, make the products not shrink and deform, facilitate the demolding of the plastic products, accelerate the product shaping, and greatly improve the production efficiency of the plastic molding machine.
-

Features of screw feeder:
Spindle speed: 400 rpm
Working capacity: 300KG – 3000KG/hour
The individual feeding height of this series of machines: 2-5m, and multiple machines can be applied for connection.
-

The recycling method of automatic edge-film online recycling device:
▲ Stainless steel feed inlet and cyclone separator.
▲ The simple motor installation makes disassembly more convenient.
▲ Add a feeding fan and cyclone separator to achieve automation and immediate recovery
-

Features of silent plastic crusher
1. Double body, with sound insulation cotton inside, closed operation; All steel welded base, solid and durable.
2. Easy to disassemble design, easy to clean and maintain.
3. Imported steel tool, sharp blade, easy to replace, durable.
4. It is easy to smash all kinds of soft and hard plastics.
-

Features of 400G monomer automatic suction machine
▲ 400G adopts an inductive high-pressure fan, which has low noise, long suction, and service life
▲ Small in size and lightweight, can be directly placed on the dryer or other raw material containers to complete automatic feeding
▲ Microcomputer operation control program. Overload and shortage alarm,
▲ It is the first to use the wired controller to control, which can be set and controlled under the machine, convenient and fast
-

▲ 700G suction machine adopts a high-speed rectifier carbon brush motor, with small volume and strong suction.
▲ The main machine and hopper are designed separately, which is safe and simple; The hopper can be directly placed on the dryer or other raw material containers.
▲ Microcomputer operation control program, overload, and shortage alarm.
-

Working principle of vertical mixer:
The vertical mixer adopts the principle of spiral mixing. It conveys the materials put into the hopper to the upper end of the barrel through the spiral spindle, and then falls in an umbrella shape and continues to mix up and down circularly, so as to achieve uniform mixing
Functions of vertical mixer:
It has the functions of automatic operation timing, overload protection, feeding limit alarm, etc;
It also has the advantages of less land occupation, large capacity, low power consumption, labor saving, convenient operation, quick mixing and even weighing.
-

- Injection molding, precision injection molding mold temperature control, extrusion molding temperature control, wheel force heating temperature control, rubber, and plastic brain mechanical temperature control.
- With complete specifications, water, and hot oil can be selected as the heat transfer medium, and suitable models can be selected according to the required temperature.
End of content
End of content